Descripción del Artí­culo

OFERTA: máquina para aplicar poliuretanos marca Gusmer Graco modelo FF1600 con SESENTA (60) metros de manguera calefaccionada (de fábrica viene con 15 metros) y tablero eléctrico completo.

La máquina está operativa y se puede probar antes de comprar.

NO incluye el compresor.

Traful SRL, San Juan

Especificaciones técnicas:

MATERIAL SUPPLY: Required chemical viscosity: 250-1500 centipoise (cP). Consult your chemical supplier
about material temperatures required to maintain correct viscosity.
Protect the chemical supply from atmospheric moisture with a blanket of dry nitrogen or
desiccated air.
Resin Inlet: 3/4" NPT (FE) swivel
Isocyanate Inlet: 1/2" NPT (FE) swivel
Material supply pressure: 400 psi maximum (27 bars)
AIR MOTOR: 16:1 ratio: 26 scfm @ 100 psi (12 liter/sec @ 7 bars)
10:1 ratio (optional): 12 scfm @ 100 psi (5.6 liter/sec @ 7 bars)
ELECTRICAL: 40 amps @ 220 volts, 50/60 Hertz single-phase, AC.
25 amps @ 380/220 volts, 50 Hertz three-phase, AC.
WEIGHT: 140 pounds (63 kilograms)
DIMENSIONS: Height: 24 inches (61 centimeters)
Width: 26 inches (66 centimeters)
Depth: 30 inches (76 centimeters)
PROPORTIONING PUMPS: Operating
Pressure:
16:1 ratio air motor - 1600 psi (110 bars)
10:1 ratio air motor (optional) – 1000 psi (69 bars)
Output: 16:1 ratio air motor - 16 lb./min. maximum (7.26 kg/min) *
10:1 ratio air motor (optional) - 12 lb./min. maximum (5.45
kg/min) *
INLET FILTER: 80 Mesh Standard (Optional - 60/40 Mesh)
PRIMARY HEATER: 5000 Watts: ¿ t=40°F (22°C) @ 10 lb./min. (4.5 kg/min) *