Smok Tfv8 Rba Coil Resistencia Reparable Para Tfv8
$ 350
efectivo
Anunciante
-
Domicilio: -
Ubicacion: Capital - San Juan
Antiguedad:
Aviso Código: 1054954
Visitas: 2364
Publicado: 22/08/2017
Actualizado: 22/08/2017
Suspendido: 12/02/2018
Descripción del Artículo
Estado:
Envía a domicilio:NO
SMOK TFV8 RBA Coil
Product Introduction
SMOK TFV8 RBA Coil, is the special Coil base for SMOK TFV8 tank, master DIY piece for TFV8 RBA vaping!
It comes with
1 x SMOK TFV8 RBA Coil
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. 18mm large deck, suitable for all types of material wire, brings you unique vaping experience
2. Turbo: 4.0T-X
3. Pre-installed: Patented Fused
4. Clapton Dual Coils 0.28Ω (50W-140W)
How to replace the coil unit/coil head
How to build the RBA:
1. before, please make sure your hands are clean;
2. take RBA apart;
3. install and position the pre-wrapped coil: place the coil between the posts and wrap the ends around the screws and tighten up, make sure the coil is fined in the center and lined up with the air hole and also make sure the coil is not touching the base;
4. cutting the ends of wire off;
5. cut a strip of cotton and make sure its not too much or too less;
6. insert the cotton, and placing it in the middle;
7. cutting the cotton at an angle and make sure its not too short or too long.
8. wet the coil with your liquid and adjust the cotton.
It is for SMOK TFV8 tank.
Our images are copyrighted. It is forbidden to reprint without our permission.
