Descripción del Artí­culo

Eleaf iJust 2 Starter Kit with 5.5ml Atomizer - 2600mAh

Presentamos el nuevo atomizador iJust 2 de Eleaf, este equipo produce grandes cantidades de vapor gracias a sus resistencias de .3 ohms. Su gran flujo de aire se controla con un anillo de plástico que además funciona como protección al atomizador, y si te gusta la mayor apertura puedes incluso quitarlo.

El atomizador iJust 2 de Eleaf es compatible con mods que tienen la función de control de temperatura con un simple cambio de resistencias por las de niquel.

Es definitivamente una gran combinación de excelente funcionalidad con un bajo precio y con la calidad reconocida de Eleaf

Eleaf iJust 2 Starter Kit with 5.5ml Atomizer - 2600mAh



Product introduction

Eleaf iJust 2 Starter Kit is an updated e-cigarette launched by Eleaf. It features the 2600mAh large power capacity despite its exquisite appearance and light weight. The 5.5ml huge e-liquid capacity makes this product more user-friendly. Buy it at HG with best price!

Parameter :
Atomizer

Material: Stainless Steel

Length: 67.5mm

Diameter: 22mm

Capacity: 5.5ml

Resistance: 0.3ohm

Wattage: 30W - 80W

Color: Silver

Thread Type: 510 Thread

Cotton: Organic Cotton

Battery

Length: 81mm

Diameter: 22mm

Capacity: 2600mAh

Output Voltage: 3.3 - 4.8V

Output Wattage: 10 - 50W

Color: Silver

Thread Type: 510 Thread

Connector: Spring

Eleaf iJust 2 Starter Kit with 5.5ml Atomizer - 2600mAh

It comes with

1 x iJust 2 Mouthpiece
1 x iJust 2 Atomizer Tube
1 x 0.3ohm EC Head (Pre-installed)
1 x iJust 2 Atomizer Standard Base
1 x iJust 2 Battery
1 x iJust 2 USB Cable
1 x iJust 2 Airflow Control Ring
1 x iJust 2 User Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.




1. 5.5ml Huge Atomizer Capacity

2. 2600mAh Power Supply

3. EC Dual Coil Head

4. Airflow Control

5. Unique Heat Dissipation Design

6. Spring Connector

7. Battery capacity indication:
Below 3.3V: the light will flash 40 times and turn off;
3.3V - 3.55V: the light will flash 4 times very quickly;
3.55V - 3.65V: the light will flash 4 times, 1 time per second;
3.65V - 3.80V: the light will flash 4 times, 1 time per 3 seconds;
Over 3.80V: the light will be on for 5 seconds (just 1 time).

How to Use

1. Assembly the atomizer first by connecting the mouthpiece, atomizer tube, atomizer head and atomizer base.

2. Thread atomizer to the battery tightly.

3. Power On/Off: Press the button 5 times in quick succession within 2 seconds. The white indicator light will flash 5 times to show iJust 2 is ready for use. By doing the same, turn off the device.

4. Long press the button to take a puff.

5. Charging: Charge iJust 2 by connecting it with wall adapter or computer via USB cable. The indicator light will be red when taking a charge. Once fully charged, indicator light will go out.

Note: It will take three hours to get a full charge via 1A wall adapter.



Protection

Atomizer Protection: When vaping time exceeds 10 seconds, iJust 2 battery will shut off automatically with white indicator light flashing 10 times.

Short-circuit Protection: When the resistance is less than 0.15ohm, short-circuit occurs with the white indicator light flashing 3 times.

Low-voltage Protection: When the voltage of battery is below 3.3V, the white indicator light will flash 40 times. At the same time, pressing power button cannot turn on.

Unlock the Low-voltage Protection: Charge the battery till voltage is above 3.7V. Then the low-voltage protection will be unlocked automatically.

How to Fill